Fully customizable powerful desktop PC
"Endeavor Pro9050a" can be customized into various configurations. As well as Windows 10 Home / Pro of OS, Ryzen 5 5600X / Ryzen 7 5800X / Ryzen 9 5900X / Ryzen 9 5950X can be selected for the processor.
Discrete GPU can be selected from GeForce GT 1030/GeForce GTX 1650/GeForce RTX 3060/GeForce RTX 3070/GeForce RTX 3080/GeForce RTX 3090/Quadro P620 (*)/Quadro P1000 (*)/Quadro RTX 4000. Items marked with an asterisk (*) are limited in stock.
The memory is from 8GB to 128GB. The storage is 5 units mixed with SSD / HDD and RAID. optical drive. The power supply is 650W/1,000W, etc. If this is the only difference, the price will change significantly as well as the weight.
What I received this time is a configuration that can be called almost the highest specification. The price is also amazing, but in the latter half of the benchmark test, it has a tremendous score. The main specifications are as follows.
| Specifications of Epson "Endeavor Pro9050a" | |
|---|---|
| Processor | Ryzen 9 5950X (16 cores 32 threads/ 3.4-4.9GHz/Cache 8MB, 64MB/TDP 105W) |
| Memory | 64GB/PC4-3200 DDR4 SDRAM(32GB×2)/4 slots Up to 128GB |
| Chipset | AMD B550 |
| Storage | M .2 PCIe Gen4 x4 SSD 2TB, HDD 4TB |
| Optical Drive | Blu-ray Disc Drive |
| Windows 10 Pro(64bit) | |
| Graphics | GeForce RTX 3090(24GB)/DisplayPort 1.4a× 3, HDMI 2.1×1 |
| Network | GbE |
| Interface | USB 3.2 Gen2 (Type-A x 1, Type-C x 1), USB 3.2 Gen1 (Type-A x 6), USB 2.0 x 3 |
| Expansion slot< /td> | PCI Express x16(Gen4)×1, PCI Express x4(Gen3)×1, PCI Express x1(Gen3)×3 (each board length up to 312mm) |
| Drive bay | 3.5-inch HDD/2.5-inch SSD x 4, 5.25-inch x 3, 3.5-inch x 1, M.2 slot x 2 |
| 1,000W | |
| Size/Weight | About 216.8×498.7×470.8mm (width×depth×height )/About 16.2-17.1kg. |
| Price including tax | From 181,940 yen (690,690 yen with this configuration) |
The processor is Ryzen 9 5950X with Zen 3 architecture. Released on November 5, 2020 on the 7nm process. It is powerful with 16 cores 32 threads, L2 cache 8MB, L3 cache 64MB, TDP 105W. The iGPU is not built in, including the SKUs mentioned above. The chipset is AMD B550.
The memory is PC4-3200 DDR4 SDRAM 32GB x 2, totaling 64GB. It has 4 slots and supports up to 128GB. Storage is M.2 PCIe Gen4 x4 SSD 2TB and HDD 4TB. It also has a Blu-ray Disc drive. The OS is 64-bit version Windows 10 Pro. Since it was 20H2, I applied and evaluated Windows Update within this range.
The graphics are NVIDIA GeForce RTX 3090 (24GB) that uses the 2nd generation RTX architecture Ampere. It is a very powerful dGPU with 10,496 CUDA cores, 1.70GHz boost clock, and GDDR6X/24GB memory. Graphics card power is 350W and this is also amazing. Equipped with DisplayPort 1.4a x 3 and HDMI 2.1 x 1 for external output.
The interface is GbE, USB 3.2 Gen2 (Type-A x 1, Type-C x 1), USB 3.2 Gen1 (Type-A x 6), USB 2.0 x 3. Expansion slots are PCI Express x16 (Gen4) x 1, PCI Express x4 (Gen3) x 1, PCI Express x1 (Gen3) x 3. Each board length is up to 312mm. Drive bays are 3.5-inch HDD/2.5-inch SSD x 4, 5.25-inch x 3, 3.5-inch x 1, M.2 slot x 2. The power supply is 1,000W. The GeForce RTX 3090 has a system power requirement of 750W, which is a change from the standard 650W.
Size about 216.8 x 498.7 x 470.8mm (width x depth x height), weight about 16.2-17.1kg. The tax-included price is 181,940 yen with the minimum configuration of Windows 10 Home / Ryzen 5 5600X / 16GB (8GB x 2) / 1TB HDD / DVD-ROM drive / NVIDIA GeForce GT 1030 2GB / power supply 650W. With this configuration, it will be 690,690 yen. GeForce RTX 3090 alone exceeds 300,000 yen (according to Kakaku.com), so although it is expensive, it can't be helped at this price.
Front. Full tower housing. The front (up) where the red accent shines. Blu-ray Disc drive, power button, audio input/output, USB 2.0 Type-A, USB 3.2 Gen1 (Type-A x 2) back. The right side is only locked with a blue lever around the center, so the back (up) that comes off easily when pulled. USB 3.2 Gen2 (Type-A x 1, Type-C x 1), USB 3.2 Gen1 (Type-A x 2), Ethernet, USB 3.2 Gen1 (Type-A x 2), USB 2.0 Type-A x 2, Audio From the input/output side (left side). Cooling of the processor is a fan type. The drive bay is also tool-free. NVIDIA GeForce RTX 3090 is huge. Carrying handle on the upper side where you can see that the front is also fixed with two bars. Without this, the installation is quite difficult inside (1/2). M.2 slot, PCI Express x16 (Gen4) x 1, PCI Express x1 (Gen3) x 1, PCI Express x4 (Gen3) x 1, PCI Express x1 (Gen3) x 2. Motherboard is inside ASUS APB550-TJ (2/2). Memory slot x 4 in front of the processor, 32GB x 2 installed Power supply is 1,000WGeForce RTX 3090. There are 3 fans and the thickness is 3 slots. As you can see from the comparison with the iPhone 13 Pro, it is quite large. Output is DisplayPort x 3, HDMI x 1 BIOS/EZ Mode (displayed with [Del] key during boot) BIOS/Advanced ModeAs you can see from the photo, the housing is full tower. It has a white base with red accents. Without the carrying handle on the top, it is quite difficult to lift the size of about 216.8 x 498.7 x 470.8 mm (width x depth x height) and weight of about 16.2 to 17.1 kg.
On the front is a Blu-ray Disc drive, power button, audio input/output, USB 2.0 Type-A, USB 3.2 Gen1 (Type-A x 2). Rear is USB 3.2 Gen2 (Type-A x 1, Type-C x 1), USB 3.2 Gen1 (Type-A x 2), Ethernet, USB 3.2 Gen1 (Type-A x 2), USB 2.0 Type-A x 2 , audio input and output. It's a pity that there is only one Type-C, but it won't be a problem because the main storage can be installed inside. DisplayPort x 3, HDMI x 1 on GeForce RTX 3090.
The left side is locked with a blue bar in the center of the back, which can be easily removed by simply pulling it. A similar mechanism has been adopted for the drive bays, making them partially tool-free. The processor is cooled by a fan. As far as the item of customization is concerned, water cooling is not supported. There are four memory slots in front, and this time 32 GB × 2 are already installed, totaling 64 GB.
GeForce RTX 3090 has 3 fans. It is thick and occupies 3 slots. As you can see from the comparison photo with the iPhone 13 Pro, it is quite large and heavy. You can see that the two bars on the front side are fixed to the housing so that it does not move.
Expansion slots are PCI Express x16 (Gen4) x 1, PCI Express x1 (Gen3) x 1, PCI Express x4 (Gen3) x 1, PCI Express x1 (Gen3) x 2. PCI Express x1 (Gen3) and PCI Express x4 (Gen3) x 1 next to PCI Express x16 (Gen4) are blocked by dGPU, so they can't actually be used. The M.2 slot is also adjacent (the other M.2 slot is below the expansion slot, although it is not shown in the photo). The motherboard is ASUS APB550-TJ from the stamp.
In normal use, the noise is fairly quiet considering the configuration. As long as you put it on your feet, you won't notice it. That said, under full load with things like 3DMark, the fan count makes a fair amount of noise. The heat was mainly from the back side, but it was a little warm.
